Products

DPG-B Conveyors
dpg-b-conveyor.jpg
<<
  1. dpg-b-conveyor.jpg
>>

Dense Phase Dense Phase

Print

Literature

The DPG-B Series is a gravity loaded, bottom discharge dense phase conveyor with a capacity rated to 100+ TPH. It is best suited for powdered, granular or pellet abrasive materials that are friable.

This unit provides the highest material-to-air ratios and the lowest line velocities resulting in smaller line sizes, lower air consumption, reduced dust collection and lower energy costs. Abrasive wear and particle degradation are also minimized with the DPG-B.

These factors translate to lower capital investment and lower operating costs. Programmable logic controls (PLCs) offer reduced supervision for automated operation.

  • Features and Benefits
  • Details
  • Materials/Characteristics
  • Case Studies
 Features and Benefits
  • Dense phase conveyor uses high pressure air to convey at extremely low line velocities (400 fpm) and higher material-to-air ratios (135-140) for less abrasive line wear and less friable/fragile product degradation than with dilute phase conveying, yet optimizing rate.
  • Top gravity load via single or dual stacked inlet valves. Bottom discharge for highest rates.
  • Less operator supervision via automated controls
  • Specify:
    • Carbon steel
    • Stainless steel or epoxy coated
    • Dual stacked inlet valves, Load cells